Serial Server Properties
b.
Click on Internet Protocol (TCP/IP) and click
<Properties>. Change the parameters to the following:
IP Address = 169.254.102.1
Subnet Mask = 255.255.255.0
Default Gateway = 169.254.102.100
c.
Use the Vlinx™ Manager Software to search for, discover,
and configure the unit.
2.
Method Two: Change the serial server’s network setting to match
your PC using Console Mode
a.
Connect a null modem serial cable (crossover cable) from
Port 1 on the serial server to an available COM port on
your PC.
b.
Open Hyper Terminal or similar serial emulation software
and connect to the COM port used in the step above.
Ensure the port is configured to 115,200 baud, 8 data bits,
and 1 stop bit.
c.
Enter Console Mode. Press and hold the serial server’s
RESET SWITCH for 2 to 10 seconds. The LED indicators
will respond as follows:
Manual Document Number: VESR9xx-4210m
www.bb-elec.com
www.bb-europe.com
32
