Vlano ifan ARIAWiFi, Operating Manual

Page: 4 / 32

ARIAWiFi
MEET THE PRESENT OPERATING REQUIREMENTS,
TO ENSURE PROPER FUNCTION AND LONG SERVICE LIFE OF THE FAN.
The device must be disconnected from the power supply before all connection, adjustment, maintenance and repair work.
Service and maintenance work must only be carried out by qualified personnel who have a valid license for
electrical work on electrical systems up to 1000V. Read the operating instructions before starting any work on
the device.
The single-phase power supply to which the device is connected must comply with the applicable electrical
standards. The cabling system must have a circuit breaker.
The electrical connection is made via a line circuit breaker QF, which is integrated in the stationary line. The contact
distance must be at least 3 mm at all poles.
Before installing the device, check it for visible defects on the impeller, housing and grille. Furthermore, it must be
ensured that there are no foreign bodies in the housing that could damage the impeller blades.
During assembly, make sure that the housing is not deformed! Deformation of the housing can cause the motor to stall
and loud noises.
Improper use, unauthorized changes and reworking as well as modifications to the device are prohibited.
Take precautions to ensure that smoke, carbon oxide gases and other flammable substances cannot enter the room through open
smoke vents or other fire protection devices. In order to avoid a back pressure of air and at the same time to ensure proper
combustion of exhaust gases and gases through the chimney, ensure that there is an adequate supply of air. The conveying air must
not contain any dust, vapors, solid foreign matter, sticky substances or fibers.
The device is not designed for use in a flammable or explosive environment that contains, for example, alcohol fumes,
gasoline or insecticides.
Do not close or cover the air inlet and outlet openings in order to ensure an optimal air flow.
4th