Vladimir's Models 36083, Recommendations For Assembly

Page: 5 / 19

www.modellmarkt24.ch
Y OD A
R ecommendations for assembly
5
T hen slide control horn into slot in flap. Next, slide control horn on pin and push horn to inside edge of hole,
toward center of wing. L eave just enough clearance between horn and hole so the horn does not scrape edge of
hole.
Use some thin C A and drip glue into pin hole. W hen C A is dry, remove tape. Pull flap down and fill space
around control horn with C A .
www.modellmarkt24.ch