VKI Technologies 145-3, Operating And Service Manual

Page: 5 / 28

T.S.S. MANUAL 9703 Page
5
OPERATING DESCRIPTION
BREWING FUNCTION PADS
Multi-brew selection mode lets you select brew volume
(REGULAR or HALF) by simply
pressing desired brew selector pad.
The green LED will light on the selector pad you have pressed. The amber
BREWING LED
will also light indicating the brew cycle has been initiated. The green LED on selected brew
cycle pad will remain on during the brew cycle. At the end of the brew cycle an audible
signal will sound and the green and amber LED’s will turn off.
If the wrong selector pad has been pushed accidentally, the user may stop the brew cycle
by pressing the
CANCEL selector pad.
PROCEDURE FOR MAKING COFFEE
Remove the brew basket from the T.S.S. by pulling it out towards you. Place coffee filter into the brew
basket, then add one package off coffee into the filter.
Insert the brew basket back into the T.S.S., then position the thermal server underneath. Check the
server’s sight gauge beforehand to make certain the server is empty, otherwise an overflow may
occur.
Do not remove the flow-thru lid.
Press the desired selection on the front selector pad. If an error was made and the wrong product was
selected, simply press the
CANCEL pad to stop the cycle.
When you hear the signal beep, it indicates that the cycle is complete and that the coffee is ready.
Remove the brew basket and discard the used grounds and coffee filter.