background image

8

This menu consists of 4 major sub-menus as follows.

- EPG Information

- TV Manager

- Radio Manager

- Timer  Manager

2. Channel 

2. Press red key to enter 

FAV

 window. In FAV list you 

can  select  the  fav  group.  Press  V-,V+  key  to  switch 

among  FAV  group  list,  Fav  channel  list  and  Program 

list. Select the program and press 

OK

 key to add it into 

Fav TV channel list. Press 

OK

  key again the program 

will disappeared in Fav TV channel list.

Press 

EXIT 

 key to save and exit.

1.Press  CH+,CH-  keys  to  select  the  program  that 

you  want  to  play,  and  then  press

 

OK

 

key

 

on

 

TV

 

manager

 

menu to view it in the small window. 

2.2 TV  Manager

2.1 EPG Information

Press red key to enter single EPG mode, press OK key to 
book  program.  Press  INFO  key  to  pop  up  information 
window.

Single EPG

In  Single  EPG  menu,  the  program  schedule  of  each 
channel  is  displayed.  You  can  use  the  following  keys  to 
operate:

1.In  the  left  list,  press  CH+,CH-  keys  to  select  a  channel 
and you can see the EPG program guide information in the 
right list.

You can press INFO key to show the brief introduction of 

the program.

2.

3. You can press ‘OK’ key to start you booking corresponding the event.
4. You can press 'REC' key to  start you recording corresponding the event.

Summary of Contents for HD3000




















Reviews: