9.1 Real-time Tracking
This function delivers a highly granular tracking record of a specific route. Once motion is
detected, every 10 seconds locate records are uploaded every 1 minute to the server
during motion.
This function is suitable for speed moving object tracking. And it works in motion only.
9.1 By SMS
SMS:
*routetrack*1-99*
(1-98 represents hours of accumulated data, 99 means
always on)
Device Response:
“Notice: System has entered routetrack function for *XX* hours.”
If
you sent 99 the device responds: “Notice: Routetrack function is set to always on.”
9.1.1 Real-time tracking location data collecting interval.
The smaller interval, the higher accuracy, but the higher power consumption.
SMS
*rsampling*1-999*
(1-999 represents seconds of data collecting interval, default
as 10 seconds)
9.1.2 Real-time tracking location data upload interval.
The smaller interval, the
higher accuracy, but the higher power consumption.
SMS
*rupload*60-999*
(60-999 represents seconds of data uploading interval,
default as 60 seconds, minimum rate should not be less than 60)
SMS
*routetrackoff*
Device Response:
“
Notice: System has ended routetrack function.
”
9.2 Check Location
This check function enables device to collect location data regularly and uploaded to
server in appointed interval. This command can be used both in idle and in motion, and
able to work with route track function at the same time.
Check by hour
SMS:
*check*0-99*
(0-99 represents hours of data upload interval, default as
*check*0*)
Check by minute
SMS:
*checkm*10-999*
(5-999 represents minutes of data upload interval, )
SMS
：
*checkoff*
Device Response:
“Notice: System has ended check function.”
