SMS: *engineon*
To end fuel cut function.
9. Battery Monitoring System
Battery monitor function suitable for models support battery check function only. Please
check your models number in Hardware Specification to confirm.
9.1 Battery Check
Battery check enables device to monitor battery status. When system detects
abnormal
high/low voltage,
or
bad battery
situation occurs, alerts will be sent to master number
and uploaded to server. System default as On.
SMS *batteryalert*on*
To enable battery check function.
SMS *batteryalert*off*
To disable battery check function.
Note:
1. When device detects battery below 10.5V, a low battery alert will be sent to master
number and uploaded to server. Tracking function will be turned off.
2. When device detects battery voltage below 8V, system will enter deep sleep mode, until
battery voltage returns back to 8.5V or above.
3. Battery status information can be viewed in APP.
10. WiFi Functions
WiFi function suitable for models support WiFi only. Please check your models number in
Hardware Specification to confirm.
10.1 WiFi Fence
10.1.1 Set WiFi Fence
WiFi fence function enables device recognising the appointed WiFi router signal as a
fence, similar to Geofence. Alerts will be triggered when device enters or exits fence.
There are a few steps to setup a WiFi fence.
Step 1
SMS
*wifilist*
Device will detect WiFi signal nearby and reply a list with wifi router names in orders.
Example
1. Apple’s home. 2. Ken’s office 3. Bear’s Cafe
Step 2
SMS
*wififence*#*
