Viztek Vizion DR+, Maintenance And Inspection

Page: 3 / 6

QA Maintenance and Inspection ViZion DR+ Detector Guide v2.0
Opal
3
Customer Support 1.800.366.5343 – support@viztek.net
VZDR-UG-QA Maintenance and Inspection ViZion DR+ Detector Guide-D-20141012-2.0
VI. Inspection
In order to ensure that the instrument is used safely and normally, be sure to inspect the instrument
before use. If any problem is found during the inspection, take measures indicated. If the problem still
cannot be corrected, contact a ViZion DR+ Dealer representative or distributor.
It is recommended that a record of the inspection be kept by making copies of the check lists in this
section, or making a separate check list.
For safety reasons, be sure to turn OFF the power of the detector when the following inspections are
about to be performed. Otherwise, it may result in electric shock
VII. Daily Inspection

Before Turning ON the Power

After Turning ON the Power

Perform the following inspection with the detector power supply.

Check Power LED after power on
Inspection
Result
Date
/
Date
/
Date
/
General
Check the
Power LED

Check Link LED when panel is connected to PC and PC is power on
Inspection
Result
Date
/
Date
/
Date
/
General
Check the Link
LED