#6 - Unlocked state duration
‘Lock-1sec’
‘Lock-7sec’
‘
’
#7 - Hotel numbering
0000
#9999
apartment handset
‘Coding is off’
‘Coding is on’
‘
’
‘Sequence No’
‘Flat No’
‘Sequence No’
‘
’
Note.
Flat No
Sequence No
1. Press . he display
2. Press
to change the
3. Press
to save changes
he display
1. Press . he display
Press
to change the
3. Press
to save changes
he display
:
1.
. he display
2.
.
3.
.
he display
4.
.
5.
.
he display
6.
7. Press
to save. he display
6
STORE
7
STORE
STORE
T
is showing:
or
current setting.
To go back to the previous setting, press
once more.
.
T
is showing:
HOTEL numbering can be enabled, if apartment numbers consist of
.
If enabled, this option allows to have the minimal apartment number #
and maximal number
. Note that
doorphone capacity remains 199+1 subscribers.
To distribute 4-digit apartment numbers within the available 200-apartment range, a list of conformance is recorded into
the Control Unit’s memory chip (see Annex A).
An example of compiling the list of conformance is given below.
Example of the List of Conformance:
An
at the apartment with No ... (the right column) shall be connected to the commutator’s output
terminals coded to sequence numbers (the left column).
T
is showing:
(the HOTEL mode disabled), or
(the HOTEL mode enabled)
2.
current setting.
To go back to the previous setting, press
once more.
.
T
is showing:
The List of Conformance shall be programmed to the Control Unit’s memory chip
Press
T
is showing:
(a sequence number for the commutator).
Dial a sequence number (the left column in the list) The display is showing the dialed number.
Press
T
is showing:
Dial the corresponding number of apartment (the right column of the list)
The display is showing the dialed number.
Press
T
is showing:
Repeat steps 2 - 5 until you have programmed the whole list.
T
is showing:
Do not press
during programming, if
has 4 digits, and
has 3 digits.
SELECT MODE 0-9
SELECT MODE 0-9
SELECT MODE 0-9
CHANGE
CHANGE
VIZIT
CHANGE
CHANGE
8
#
#
#
This option
available
S
up to 4 digits
is
only for
doorphone / video doorphone of eries 400.
If the HOTEL mode is enabled, settings #1 -
, #2 -
, and #3 -
shall be programmed as
sequence numbers (the left column).
To enable / disable HOTEL numbering:
Min ap N
Max ap N
Concierge N
#8 - Programming the List of Conformance
ed
recognized
between apartment numbers
dial
from the doorstation and numbers
by commutators
Sequence Number
number recognized by commutator
(
)
APARTMENT NUMBER
1
2
...
10
11
...
...
20
101
...
110
101
102
...
110
201
...
...
210
1001
...
1010
www.vizit-group.com
VIZIT-TU412M1 Operating Instruction (revision
11
11 17
2015-
)
/
