The monitor terminals and their destination are given below
See Fig. 4 - 7 for the
of the monitor and other doorphone units.
Acceptable cross-sections of wires to connect the monitor to the power supply, doorstation / control unit
(Fig. 4 - 5) are given in the doorstation / control unit operating instructions.
Acceptable cross-sections of wires to connect the monitor to the commutator BKM-440 (Fig. 6 - 7)
are given in the commutator BKM-440 operating instruction.
If the monitor operates together with the commutator BKM-440, a door bell button connection is not available
:
.
examples of wiring diagrams
Note.
To transfer video from the monitor to your TV set, use a jack plug ( = 3.5 mm, mono or stereo).
EXAMPLES OF WIRING DIAGRAMS
LN +
LN -
GND
VI1
+E
DATA
Ec1
Ec2
GND
VI2
Figure
Plug for the Video OUT jack
3 -
GND
2
1
Video
1
2
1
2
3
GND
2
1
Video
3
Mono Plug
Stereo Plug
DATA exchange between monitor and commutator BKM-440
Supply voltage for minitor
VIDEO IN for doorstation built-in camera
Ground
Intercom line of monitor and doorstation
Destination
VIDEO IN for
camera
extra
Ground
Supply voltage for
camera
extra
Supply voltage for doorstation built-in camera
Terminal
Figure
Monitor
with multi-apartment
doorstation and extra camera
56
4 -
VIZIT-M4
C
VO
Ec
GND
LN-
GND
LN+
VI1
+E
DATA
Ec1
Ec2
GND
VI2
To next commutators
To other apartments
VO
VG
VG
-18
+18
V1
FA
LN
VG
V2
FB
LN
VG
V3
FC
LN
VG
V4
FD
LN
VG
GND
LINE
SEL
Ek
VI
82-Ohm resistor should be
connected between the VO
and VG terminals of the last
commutator in the circuit
- 4
MONITOR
VIZIT M 56C
Extra Camera
12 V
max
, 0.3 А
18 , 0.5А
18/12-1-1,
Power Supply
V
BPD
SA03010029
(recommended power supply units:
)
+
-
To doorstation / control unit
Door bell
button
Note.
Door bell button can be installed near your apartment door, and connected to GND and DATA terminals of the monitor
Commutator
BK-4MV
or BK-4V
(
)
