SAFETY INSTRUCTIONS
WARNING!
230V
DOORPHONE FEATURES
BUD-408
VIZIT
30
1200
* Note: Only VIZIT RF-keys are supported
VIDEO DOORPHONE COMPONENTS
BUD-408
BVD-408RCB-40
BVD-408RCB
BS-1 BS-2 BS-4 BS-8
1 2 4
8
VIZIT-PК200
BК-4V BК-4
BК-4 BК-4
BК-10 BК-30
BК-2V
RVS-4
VIZIT-M460CM VIZIT-M430C
UKP-8SM UKP-12
UKP-12M
VIZIT-ML400x VIZIT-ML300
"EXIT 300"
INSTALLATION
Warning: Do not mount the unit near heating equipment!
The Control Unit contains dangerous for life high voltage (
).
Unplug the unit before replacing the fuse and connecting the wires.
To avoid damage or electric shock do not make any repair when the power is on.
The mains plug shall remain readily operable.
No metallic objects shall penetrate into ventilation openings of the unit.
The unit shall not be exposed to dripping or splashing and no objects filled with liquids shall be placed on the unit.
Individual CALL button for each subscriber
A beep at the doorstation and subscriber device when a CALL button is pressed
Duplex intercom (up to 80 seconds)
Entrance door unlocking:
- by applying RF-keys*
- by pressing the DOOR OPEN button on a monitor / handset during intercom
- by pressing the indoor EXIT button
Programmable unlocked state duration (1 to 12 seconds)
Voice MENU and messages during programming and work
Team-work of 2
Control Units.
Team-work with
Concierge Console
RF-keys memorizing (up to
keys per 1 apartment; up to
keys total)
A short beep at a handset / monitor in an apartment when its RF-key is used
Name plates backlighting
Illumination for doorstation camera
Control Unit is intended for joint operation with:
- Doorstation
or
;
- Button Stations
,
,
,
(with , , or CALL buttons respectively);
- Concierge Console
;
- Commutators
,
,
,
,
,
;
- Video Switcher
;
- Video Distribution Amplifier
;
- Monitors
,
;
- Apartment Handsets
,
or
;
- Electromagnetic Lock
,
or
- Electromechanical Lock with min.10 Ohm impedance;
-
Button.
All listed devices are available upon request.
The Control Unit should be fixed on a wall or inside a mounting box in heated premises with sufficient ventilation.
The terminals should be oriented
. Such conditions provide proper ventilation of the unit.
The unit can be fixed by means of a DIN-rail or screws.
·
·
·
·
·
·
·
·
·
·
·
·
M
M
MV
M
®
horizontally