VIZIO XVT472SV User Manual
Version 12/1/2009
19
www.VIZIO.com
Chapter 4 Using your HDTV the first time
Selecting an Input Source
Select the input source for your HDTV by pressing
INPUT
on the remote control or side of your HDTV. Pressing this
button will cycle you through the following options:
TV,
AV1
,
AV1, COMPONENT 1
,
COMPONENT 2
,
RGB
(VGA),
HDMI1, HDMI2, HDMI3,
and
HDMI4
.
Turn on your device and you will see a picture on your
HDTV. If there is no picture, make sure you have selected
the correct input on your HDTV.
Note:
If the selected device is RF connected, your HDTV
needs to be in
TV
mode and on either channel 3 or
channel 4 matching the channel which has been selected
on the back of the VCR, Cable Box, External TV Tuner or Satellite Receiver. Please refer to Owner or
User’s Manual of such equipment for details.
Setting the Time Zone and Daylight Savings
1. Select
TV
using the
INPUT
button on the remote control.
2. Press
MENU
to bring up the Menu display. The Picture Menu is
highlighted.
3. Press
▲
or
▼
to highlight TV, and then press
OK
to select it.
4. Press
either
▲
or
▼
to scroll to Time Zone, and then press either
◄
or
►
to set the proper Time Zone of your area.
5. Press
▼
to scroll down to Daylight Saving, and then press either
◄
or
►
to set to On or Off.
6. Press
MENU
once to return to the previous screen or repeatedly to
return to your program if task has been completed.
Your new HDTV is now ready to use. Enjoy your TV watching!!
