VIZIO VMT37-60S User Manual
Version 10/16/2009
7
www.VIZIO.com
Concrete Walls
A. Mark and drill holes
1. Tape the included Wall Mount Template to the wall. Hold the wall plate [1] up to the Wall
Mount Template and use the built-in level to make sure it is level. Put the wall plate [1]
aside.
2. Drill 6 holes with a 1/2” masonry bit, 2-1/2” deep where indicated. Remove the Wall
Mount Template.
B. Install anchors
1. Install the provided anchors [5] in the holes,
flush with the wall so that the hinged end
faces out.
C. Anchor mount to wall
1. Using a 1/2” wrench or socket, attach the
wall plate [1] to the wall with the supplied lag
bolts and washers [3] & [4].
2. Use the level before tightening bolts.
Note:
It is important to make sure the wall
plate is level.
Note:
Do not over-tighten lag bolts. Tighten
only until they are firmly against the wall plate.
A
B
C
