background image

20

www.VIZIO.com

VIZIO VMM26 F20I User Guide

VIZIO Limited Product 

Warranty

VIZIO provides a “ONE-YEAR LIMITED WARRANTY” against manufacturing defects in materials 

and workmanship to the original purchaser of a new VIZIO display purchased from an 

authorized VIZIO U.S. reseller and used in the fifty (50) United States or Puerto Rico. 

VIZIO's Responsibility

VIZIO displays purchased new from an authorized VIZIO U.S. reseller and that are used in the 

fifty (50) United States or Puerto Rico are warranted to be free from manufacturing defects in 

materials and workmanship for one (1) year from the date of the original retail purchase. If the 

display fails to conform to this limited warranty, VIZIO will, at its option and sole discretion, 

repair or replace the display.   

Labor

During the one-year limited warranty period, VIZIO will provide, when needed, service labor to 

repair a manufacturing defect. Repairs required on displays which are thirty (30) inches and 

larger generally will be made “on-site” where the display is installed. The determination for 

performing the on-site repair is dependent upon the manufacturing defect and is at VIZIO's 

option and sole discretion. Repairs required on displays which are less than thirty (30) inches 

generally will be performed at a VIZIO service center.   

Parts

Repairs may be made with new or recertified parts, or the entire unit may be replaced with a 

new or recertified unit, at VIZIO's option and sole discretion. Replacement parts or replacement 

units provided under this limited warranty are warranted for the remaining portion of the 

original warranty period, or for ninety (90) days from warranty service or replacement, 

whichever is later.

How to Obtain Warranty Service

To obtain warranty service, contact VIZIO Technical Support via email at 

[email protected], via phone at 877-MYVIZIO (877-698-4946), or via postal mail at VIZIO 

Technical Support, 39 Tesla, Irvine, CA 92618. You must provide the model, serial number, and 

date of purchase. VIZIO Technical Support is available from 6:00AM to 9:00PM Pacific Time, 

Monday through Friday, and 10:00AM to 2:00PM Pacific Time, Saturday and Sunday. Please 

note that holiday hours may vary. For up to date information, please visit www.VIZIO.com. 
VIZIO reserves the right to assess all warranty claims and to determine if defects or damages 

are covered by this limited warranty. In case of a claim that is not covered by this warranty, you 

will be contacted to determine whether VIZIO should repair the damage for a fee or whether 

the product should be returned to you as received by the service technician or service center.
Parts and service labor that are VIZIO's responsibility under this limited warranty will be 

provided without charge. All other service is at the customer's expense. VIZIO reserves the 

right to charge the customer for any service call for anything not covered by this limited 

warranty. Before you ask for warranty service, please review your User Manual. You may avoid a 

service call and a service charge. 
Please refer to the reverse side of this page for additional information regarding how to obtain 

warranty service. 

PLEASE DO NOT RETURN YOUR UNIT TO VIZIO WITHOUT PRIOR AUTHORIZATION.

Summary of Contents for VMM26 - 26 Inch LCD Glass Multi Media Display
























Reviews: