VBR100_FW1001
Rev 9.14.2009
When the update process is complete, the success screen will be displayed and the tray will open (Fig 3).
FIG 3
7. Remove the disc from the tray, then press “
SELECT
” on the player remote.
The tray will close and the player will restart.
The firmware should then be updated. You can check the revision by doing the following:
1. Power on the unit and wait for the "no disc" message
2. Open the tray
3. Enter the digits 7804 in succession on the player remote.
The screen should display all the rev numbers and you should see the 3.4z label on the loader revision.
The Firmware Update process is complete.
