VIZIO VA26L HDTV10T User Manual
Version 4/23/2010
12
www.VIZIO.com
Chapter 3 VIZIO Remote Control
Installing the Batteries
1. Remove the battery cover.
2. Insert two AA batteries into the remote control. Make sure that you match the (+) and (-) symbols on
the batteries with the (+) and (-) symbols inside the battery compartment.
3. Replace the battery cover.
Precautionary Tips for Inserting the Batteries:
•
Only use AA batteries.
•
Do not mix new and old batteries. This may result in cracking or leakage that may cause a fire or
lead to personal injury.
•
Inserting the batteries incorrectly may also result in cracking or leakage that may cause a fire or
lead to personal injury.
•
Dispose of batteries according to local hazardous waste regulations.
•
Keep the batteries away from children and pets.
Remote Control Range
•
Point the remote control directly at this sensor for
the best response to the remote signal.
•
Do not place any obstacles between the remote
control and the remote control sensor.
•
The effective range of the remote control is
approximately 26 feet (8 meters) from the front of
the remote control sensor, and 13 feet (4meters)
when 30° to the left and right, 15° up and down.
VIZIO Remote Control Precautions
•
The remote control should be kept dry and away from heat sources. Avoid humidity.
•
If the TV responds erratically to the remote control or does not respond at all, check the batteries.
If the batteries are low or exhausted, replace them with fresh batteries.
•
When not using the remote control for a long period of time, remove the batteries.
•
Do not take the batteries apart, heat them, or throw them into a fire.
•
Do not subject the remote control to undue physical stress, such as striking or dropping it.
•
Do not attempt to clean the remote control with a volatile solvent. Wipe it with a clean, damp
cloth.
