Vizio SV470XVT User Manual Download Page 14

Page: 14 / 104

VIZIO SV470XVT1A User Manual

Version 6/2/2008

www.VIZIO.com

Use this button for the On-Screen Display (OSD) menus.

LAST

– This button recalls the previously viewed channel.

Use the Navigation Wheel to operate the On-Screen

Display (OSD) after it has been activated by pressing the MENU button.

Use the

button to select your chosen option in On-Screen Display

(OSD) menus.

GUIDE

– This button displays program information. Note: This

function is only available on DTV.

EXIT

– This button exits the On-Screen Display (OSD) menus.

VOL (+ or -)

– These buttons turn the volume up or down.

5.1 Surround Sound -

This function is not available on this model

and pressing this button has no effect, unless wireless speaker system is
present.

MUTE

– This button turns the sound on and off.

CH (+ or -)

– These buttons change the channels up or down.

Summary of Contents for SV470XVT









































































































Search results

Summary of Contents for SV470XVT

Reviews:

Vizio SV470XVT, User Manual, Page: 14 / 104

Search results

Summary of Contents for SV470XVT

Reviews: