English - 21
Function
LED
Behavior
Description
Surround Balance
Surr Bal
Two center LEDs
indicate Surround
Balance is centered.
Press the
Next/Previous button to increase/decrease the surround balance level on
each side. The LED indicators will move to the top with balance levels to the right and
down with balance levels to the left.
Subwoofer Levels
Subwoofer
Two center LEDs
indicate subwoofer
level 0.
Press the
Next/Previous button to increase/decrease the level of the subwoofer.
The LED indicators will move to the top with increasing levels and to the bottom with
decreasing levels.
Note: Decreasing the level to the minimum turns off the subwoofer.
Equalizer Mode
EQ
Press the
Next/Previous button to toggle between 3 preset equalizer settings, Music,
Direct and Movie.
Note: Movie mode is on by default.
Surround On/Off
Surnd
Press the
Next/Previous button to enable/disable surround sound. When
enabled (On), Direct and Movie mode will produce 5.1 surround sound. Music will
produce 3.1 surround sound. When disabled (Off), the satellite speakers will be disabled.
Note: If EQ mode is set to Direct and Surround is set to Off, the sound bar will output 2.1
audio without center or satellites.
DTS TruVolume
On/Off
TruVol
Press the
Next/Previous button to enable/disable TruVolume. When enabled (On),
TruVolume provides a consistent and comfortable volume level for a more enjoyable
listening experience.
Note: Default is setting is Off
Night Mode On/Off
Night
Press the
Next/Previous button to enable/disable Night Mode. When enabled (On), the
sound bar will lower bass frequency levels to provide a more quiet environment (ideal
for apartment living and homes with sleeping children).
Function
LED
Behavior
Description
Virtual:X
VRT:X
Press the
Next/Previous
button to enable/disable
Virtual:X. When enabled (On),
all inputs will produce a virtual sound technology that simulates the effect of having
overhead sound. When disabled (
Off), all sources will playback in without virtualization.
TV Remote
VZtv Rmt On
Press the
Next/Previous button to enable/disable VIZIO TV Remotes. When enabled
(On), you can use a VIZIO TV remote control to turn on the sound bar (using the TV
Volume Up button) and control volume.
Program Remote
Prg Remote
−−
Press the
Next/Previous
and
Play
buttons to toggle and select and program your TV
remote to control the
Volume Down, Volume Up, and Mute
functions on your sound
bar. See the
Program Remote section for more information.
Eco Power On/Off
Eco Pwr
Press the
Next/Previous button to enable/disable Eco Power Mode. When enabled
(On), the sound bar will go into standby after a period of inactivity. The sound bar will
automatically turn off when no audio signal is detected. Off disables this feature.
Note: If you would like to cast content without the need to manually turn on the sound
bar, set this function to OFF.
Speaker Test
Spkr Test
—
Press the
Play/Pause button to activate the speaker test function. A voice will begin call
-
ing out each speaker beginning with
left front
(Left Front, Center, Right Front, Right Rear,
Left Rear, and subwoofer-white noise). If any of these are missing, check the connection
and run the speaker test function again.
Info
Info
—
Press the
Play button to have the sound bar verbally announce the current sound bar
input and audio type being played with corresponding LED indicators.
TV Remote On
TV Remote Off
Eco Power On
Eco Power Off
Virtual:X On
Virtual:X Off
