English - 22
Function
LED Behavior
Description
TV Remote
VZtv Rmt On
Press the
Next/Previous button to enable/disable VIZIO TV Remotes. When
enabled (On), you can use a VIZIO TV remote control to turn on the sound bar
(using the TV
Volume Up button) and control volume.
Program Remote
Prg Remote
−−
Press the
Next/Previous and Play buttons to toggle and select and program
your TV remote to control the
Volume Down, Volume Up, and Mute functions
on your sound bar. See the
Programming the Sound Bar section for more
information.
Eco Power On/Off
Eco Pwr
Press the
Next/Previous button to enable/disable Eco Power Mode. When
enabled (On), the sound bar will go into standby after a period of inactivity.
The sound bar will automatically turn off when no audio signal is detected. Off
disables this feature.
Note: If you would like to cast content without the need to
manually turn on the sound bar, set this function to OFF.
Power LED
Pwr LED
Press the
Next/Previous and Play buttons to enable/disable the Power LED.
Speaker Test
Spkr Test
—
Press the
Play/Pause button to activate the speaker test function. A voice will
begin calling out each speaker beginning with
left front. (Left Front, Center,
Right Front, Right Rear, Left Rear, Left Front Height, Right Front Height, Right
Rear Height, Left Rear Height, and subwoofer-white noise) If any of these are
missing, check the connection and run the speaker test function again.
Power LED On
Power LED Off
TV Remote On
TV Remote Off
Eco Power On
Eco Power Off