3
34
Restoring the TV to Factory Default Settings
All of the on-screen menu settings can be reset to the factory
defaults.
If you restore the TV to the factory default settings,
all changes you have made to the settings will be lost!
This includes any wireless or picture settings.
To restore the TV to its factory default settings:
1. Press the
Menu button on the remote. The on-screen menu is
displayed.
2. Use the
Arrow buttons on the remote to highlight System and
press
OK. The SYSTEM menu is displayed.
3. Highlight
Reset & Admin and press OK. The RESET & ADMIN
menu is displayed.
4. Highlight
Reset to Factory Defaults and press OK. If you have
changed the set system PIN, enter it now.
The TV displays, “Select Reset to restore all TV settings to
factory defaults and clear all account information.”
5. Highlight
Reset and press OK.
6. Wait for the TV to turn off. The TV will turn back on shortly
afterward and the Setup App will begin.
USING THE RESET & ADMIN MENU
You can use the TV’s RESET & ADMIN menu to restore the TV to its
factory default settings as well as access other system settings.
Using the RESET & ADMIN, you can:
• Reset the TV to factory
settings
• Force the system to power
off and on
• Turn the LED Power indicator
On or Off
• Create a system pin code
to lock content and picture
settings
• Enable or Disable device
charging via the USB port
• Enable or disable program
offers and suggestions
• View the VIZIO privacy policy
• Start or stop the Store Demo
Mode
Reset & Admin
Reset to Factory Settings
Soft Power Cycle
Power Indicator On
System PIN Code
USB Power Always On
Viewing Data On
VIZIO Privacy Policy
Store Demo
Back
Turning the Power Indicator On or Off
The Power Indicator on the front of your TV normally does not glow
when the TV is on. You can change this setting if you prefer the light
to be on.
To turn the Power Indicator Light On or Off:
1. Press the
Menu button on the remote. The on-screen menu is
displayed.
2. Use the
Arrow buttons on the remote to highlight System and
press
OK. The SYSTEM menu is displayed.
3. Use the
Arrow buttons on the remote to highlight RESET &
ADMIN and press
OK. The RESET & ADMIN menu is displayed.
4. Highlight
Power Indicator and press OK.
5. Use the
Up/Down Arrow buttons to select On or Off, then
press
OK.
