27
8. Basic
Operation
8.1 Power On / Off
•
Press the POWER key to turn on the display. The power indicator
will change from red to green.
•
Press the POWER key again to return the display to Standby mode.
The power indicator will change from green to red.
Note: The power indicator will flash for a few seconds before
changing color.
8.2 Input Mode Selection
•
When the Input key is pressed, a menu of input signal sources will
appear on-screen. Use the
c
/
d
keys to select the signal source
desired and press the
f
key to confirm the selection. The signal
sources are displayed in the following sequence:
RGB1
D
RGB2
D
AV1
D
S-Video
D
YCbCr/PbPr
D
TV/CATV
RGB1 = Analog D-Sub input on the PC Module.
RGB2 = Digital DVI-D input on the PC Module.
Note: You may also press the Input key repeatedly until the
signal source you want is highlighted. When selecting an input
in this manner, you do not have to press the
f
key. The
selected input will appear after a brief pause.