4
ADJUSTING THE AUDIO SETTINGS
To adjust the audio settings:
1. Press the
MENU
button on the
remote. The on-screen menu
is displayed.
2. Use the
Arrow
buttons on the
remote to highlight
Audio
and
press
OK
. The AUDIO menu
is displayed.
3. Use the
Arrow
buttons to
highlight the setting you wish
to adjust, then press
Left/
Right Arrow
buttons to change
the setting:
• TV Speakers
- Turns the
built-in speakers on or off.
• Surround Sound
- Surround sound uses DTS TruSurround
™
to deliver an immersive surround sound experience from
the TV’s internal speakers. TruSurround completes the
entertainment experience by providing deep, rich bass
and by delivering crisp details and clear, intelligible dialog.
Select
On
or
Off
.
• Volume Leveling
- Volume leveling uses DTS TruVolume
™
to maintain consistent volume levels during transitions
between program content, AV formats, and input sources.
Select
On
or
Off
. In a few cases, volume leveling may
artificially suppress volume increases, making it difficult to
hear dialog or flattening sudden noises. If this occurs, turn
volume leveling off.
• Balance
- Adjusts the loudness of the audio output from
the left and right speakers.
Help
VIZIO
Network
Sleep
Timer
Input
CC
ABC
Wide
Normal
Settings
Panoramic
Wide
Zoom
2D
3D
Exit
AUDIO
TV Speakers
On
Surround Sound
On
Volume Leveling
On
Balance
0
Lip Sync
0
Digital Audio Out
PCM
Analog Audio Out
Fixed
Equalizer
Delete Audio Mode
-
+
-
+
When the TV speakers are set to
On
, DTS signals
cannot be passed through digital audio outputs.
• Lip Sync
- Adjusts the synchronization between the display
image and the accompanying audio track.
• Digital Audio Out
- Changes the type of processing for
digital audio out and HDMI ARC output when connected
to a home theater audio system. Select
PCM
or
Bitstream
.
• Analog Audio Out
- Sets the volume control properties for
the RCA connector when connected to a home theater
audio system. Select
Variable
if you are controlling the
volume with the TV’s volume controls, or select
Fixed
if
an external audio device (sound bar or AV receiver) will
control the volume.
• Equalizer
- Adjusts the boost or attenuation of different
frequencies using either preset or custom settings. See
Changing the Equalizer Settings on page 25.
• Delete Audio Mode
- Deletes a custom audio mode
created using the Equalizer Settings. See
4. When you have finished adjusting the audio settings, press
the
EXIT
button on the remote.
You must select
Bitstream
for audio with more than
two channels (3.0, 5.0, or 5.1, for example).
Changing the Equalizer Settings
The graphic equalizer has several pre-set modes and allows you
to create one custom mode.
To select a pre-set audio mode:
1. Press the
MENU
button on the remote. The on-screen menu is
displayed.
2. Use the
Arrow
buttons on the remote to highlight
Audio
and
press
OK
. The AUDIO menu is displayed.
3. Use the
Arrow
buttons to highlight
Equalizer
and press
OK
.
The Audio Mode and equalizer settings screen appears.
4. Use the
Left
and
Right Arrow
buttons to select an audio
mode. The equalizer bars change to reflect the mode.
5. Press the
EXIT
button on the remote.
25
