5
28
Selecting a Tuner Input
Select the type of tuner input you will be using. You can select either
Antenna (Over-the-air) or Cable (Out-of-the-wall) connections.
1. From the TUNER menu, highlight
Tuner Mode
and press
OK
.
The TUNER MODE menu displays.
2. Highlight
Antenna
or
Cable
and press
OK
. Press
EXIT
.
Scanning for Channels
Before the TV can detect and display channels and their
associated information, you must scan for channels. A channel
scan may also be necessary when the TV has been moved to an
area where different free-to-air broadcast television channels are
available.
To perform an Auto Channel Scan:
1. From the TUNER menu, highlight
Auto Channel Scan
, and press
OK
. The CHANNEL SCAN begins.
2. Wait until the channel scan is
100% complete. Highlight
Done
and press
OK
.
3. Press the
EXIT
button on the
remote.
If the channel scan is cancelled,the
channels that were already
discovered are retained. A new
channel scan will clear all channels.
Help
VIZIO
Network
Sleep
Timer
Input
CC
ABC
Audio
Wide
Normal
Picture
Settings
Panoramic
Wide
Zoom
2D
3D
Exit
CHANNEL SCAN
Channel Scan
Digital Channels: 0
Analog Channels: 0
13% Complete
Cancel
Cancel the channel scan.
Adding New Channels
Occasionally, you may need to add a new range of channels or
add a new analog channel. You can do this by using the Partial
Channel Search and Add Analog Channel options.
To add a range of new channels:
1. From the TUNER
menu, highlight
Partial Channel Search
,
and press
OK
. The PARTIAL CHANNEL SEARCH menu is
displayed.
2. Highlight
Scan Mode
and select the type of channel you
are adding:
Analog
,
Digital
, or
Analog/Digital
.
3. Highlight
From Channel
and enter the channel where
you want to begin the scan. (Use the
Left Arrow
button to
backspace. Use the
Number Pad
on the remote to enter the
channel.)
4. Highlight
To Channel
and enter the channel where you want
to end the scan. (Use the
Left Arrow
button to backspace.
Use the
Number Pad
on the remote to enter the channel.)
5. Highlight
Start
and press
OK
. The partial channel search
begins.
6. Wait until the partial channel search is 100% complete.
Highlight
Done
and press
OK
.
7. Press the
EXIT
button on the remote.
