Vizio D40-D1 User Manual Download Page 4

iv

•  Do not apply pressure or throw objects at your TV. This may 

compromise the integrity of the display. The manufacturer’s 

warranty does not cover user abuse or improper 

installations.

•  The power cord must be replaced when using different 

voltage than the voltage specified. For more information, 

contact your dealer.

•  When connected to a power outlet, power is always flowing 

into your TV. To totally disconnect power, unplug the power 

cord.

•  The lightning flash with arrowhead symbol within an 

equilateral triangle is intended to alert the user to the 

presence of un-isolated, dangerous voltage within the 

inside of your TV that may be of sufficient magnitude to 

constitute a risk of electric shock to persons.

•  Do not overload power strips and extension cords. 

Overloading can result in fire or electric shock. 

•  The wall socket should be installed near your TV and easily 

accessible.

•  Only power of the marked voltage can be used for your TV. 

Any other voltage than the specified voltage may cause fire 

or electric shock.

•  Do not touch the power cord during lightning. To avoid 

electric shock, avoid handling the power cord during 

electrical storms.

•  Unplug your TV during a lightning storm or when it will not 

be used for long period of time. This will protect your TV 

from damage due to power surges.

•  Do not attempt to repair or service your TV yourself. 

Opening or removing the back cover may expose you to 

high voltages, electric shock, and other hazards. If repair 

is required, contact your dealer and refer all servicing to 

qualified service personnel.

•  WARNING: Keep your TV away from moisture. Do not expose 

your TV to rain or moisture. If water penetrates into your TV, 

unplug the power cord and contact your dealer. Continuous 

use in this case may result in fire or electric shock.

•  Do not use your TV if any abnormality occurs. If any smoke 

or odor becomes apparent, unplug the power cord and 

contact your dealer immediately. Do not try to repair your 

TV yourself. 

•  Avoid using dropped or damaged appliances. If your TV 

is dropped and the housing is damaged, the internal 

components may function abnormally. Unplug the power 

cord immediately and contact your dealer for repair. 

Continued use of your TV may cause fire or electric shock.

•  Do not install your TV in an area with heavy dust or high 

humidity. Operating your TV in environments with heavy 

dust or high humidity may cause fire or electric shock.

•  Follow instructions for moving your TV. Ensure that the 

power cord and any other cables are unplugged before 

moving your TV.

•  When unplugging your TV, hold the AC/DC power adapter, 

not the cord. Pulling on the power cord may damage the 

wires inside the cord and cause fire or electric shock. When 

your TV will not be used for an extended period of time, 

unplug the power cord.

•  To reduce risk of electric shock, do not touch the connector 

with wet hands. 

•  Insert batteries in accordance with instructions. Incorrect 

polarities may cause the batteries to leak which can 

damage the remote control or injure the operator. Do not 

expose batteries to excessive heat such as sunshine, fire or 

the like.

•  If any of the following occurs, contact the dealer: 

        - The power cord fails or frays.  

        - Liquid sprays or any object drops into your TV.  

        - Your TV is exposed to rain or other moisture. 

        - Your TV is dropped or damaged in any way. 

        - The performance of your TV changes substantially.

•  This apparatus shall not be exposed to dripping or 

splashing and no objects filled with liquids, such as vases, 

shall be placed on the apparatus.

•  The mains plug or appliance coupler is used as the 

disconnect device, the disconnect device shall remain 

readily operable.

•  CAUTION - These servicing instructions are for use by 

qualified service personnel only. To reduce the risk of 

electric shock, do not perform any servicing other than 

that contained in the operating instructions unless you are 

qualified to do so.

•  The lightning flash with arrowhead symbol within an 

equilateral triangle is intended to alert the user to the 

presence of uninsulated DANGEROUS VOLTAGE within the 

product’s enclosure that may be of sufficient magnitude to 

constitute a risk of electrical shock to persons.

•  WARNING: Exposure to loud sounds can damage your 

hearing causing hearing loss and tinnitus (ringing or 

buzzing in the ears).  with continued exposure to  loud 

noises, ears may become accustomed to the sound level, 

which may result in permanent damage to hearing without 

any noticeable discomfort.

•  Install the TV where it cannot be pulled, pushed or knocked 

over.

•  Do not allow children to hang onto the product.
•  Store the accessories (remote, batteries, etc.) in a location 

safely out of the reach of children.

•  The American Academy of Pediatrics discourages television 

viewing for children younger than two years of age.

h  

Summary of Contents for D40-D1







































































Reviews: