The remote control provides easy access to all of the receiver’s functions, including selecting channels and using the menus.
It uses infrared signals, and must be operated within three to four meters from the receiver.
When using the remote control, be sure there is a direct line of sight to the receiver. Also note that although the receiver
can be operated from the buttons on the front panel, some of the receiver’s functions can only be accessed using the remote
control. The batteries for remote control are packaged separately, please install these batteries in the remote control before
using the receiver. And check b/-is correct.
To avoid damaging the remote control, discard any depleted or old
batteries.
The buttons on the remote control are described as follows
•
Numeric Buttons
For entering channel number or password
•
STANDBY
Switches the receiver between ON and STANDBY modes
•
INFO
Displays I-Plate providing information about the current channel
•
AUDIO
Toggles between multi-lingual Audio soundtracks
•
MENU
Activates the On-Screen Menu
•
LIST
Displays the complete channel/program list
•
FAV
Displays the Favorite channel list
•
Direction buttons
To move through menus or submenus
•
SELECT
Selects the highlighted menu or submenu item
•
CH+/CH
－
Provides channel up and down functions
•
VOL+/VOL
－
Increases or decreases audio volume
•
A.RATIO
Adjusts the aspects ratio between 16:9 and 4:3
- Wide Vision : to display 16:9 program on 16:9 TV screen
to display 4:3 program on 4:3 TV screen
- Wideview Normal : to display 16:9 program on 4:3 TV screen in
letterbox
- Normal Vision : to display 16:9 program cropped on 4:3 TV screen
•
PIP
Shows the multiple programs list in the same DTV Network
the receiver is tuned to and allows displaying the second program
on the TV screen
•
AUX
Selects between ANT.IN (DTV signal) and AUX (DVD or
VCR) inputs
•
V.Format
Toggle between 576i, 576p, 720p and 1080i video format
through Y/Pb/Pr video format connector
5
REMOTE CONTROL
