E.
Install projector (mounted on element B) on guide
C in a cover.
F.
Close enclosure. Then install enclosure with
projector inside to a element A (already installed
to the ceiling).
G.
Adjusting projector image. If projected image needs to
be adjusted, loosen the appropriate screw E, F or G
and tilt the cover (with projector inside) into a proper
position. After obtaining the correct position of the
projector, tighten screws.
H.
Power supply connections: Projector power supply cable connect to a trigger and enclosure power supply
cable to a power supply. TRIGGER and cooling fan with filter( filter should be checked etery 6 mitns and
Exchange to a new one if needed), is already installed on a back of enclosure.
2.
Technical Specification:
Capacity:
PROTECT Slim - 17 kg
PROTECT 54-80 - 17 kg
PROTECT 72-116 - 17 kg
Adjustment:
Up-Down
Left-Right
Tilt
Weight of unit:
PROTECT Slim 25 kg
PROTECT 54-80 26,7 kg
PROTECT 72-116 27,5 kg
3.
Mounting kit set :
bolts:
M4x20 – 4 pcs.; M5x20 – 4 pcs.;
M6x20 – 4 pcs.; M8x20 – 4 pcs.;
washers:
ø4x9 – 4 pcs.; ø5x10 – 4 pcs.;
ø6x12 – 4 pcs.; ø8x16 – 4 pcs.;
dowels
:
ø8x40 – 4 pcs.
screws:
ø5x40 z flat head – 4 pcs.
manufactured: VIZ-ART Automation
tel.+48 22/6138899 www.viz-art.pl
2/2
