Key
OFF
Lamp is off
Red LED flashes
Locked
2 seconds
Long press
OFF
OFF:
Locked
Green LED flashes
Unlocked
2 seconds
Long press
OFF:
100% - 55% (Green)
55% - 10% (Yellow)
9% - 1% (Red)
Connection interface
USB cable
Micro USB Type B
Belt holder
Cover
Operating Instructions
SG-L02 Head lamp red-light white-light
Art. No. X071089
Open the USB port cover on the bottom of the lamp.
1. Plug the supplied USB cable into the USB port.
2. The indicator lights up red during charging.
3. The indicator lights up green after charging is complete.
4. The charging time is about 3 hours at DC5V / 500-600mA.
B
Battery indicator
1. The battery indicator shows the remaining operating time
in different
colo urs.
2. When the battery is fully discharged, the display flashes
once when the switch is pressed.
C
Key lock function
To prevent unintentional operation, a key lock function is built in.
1. Press and hold the switch for at least 2 seconds whilst
turning off.
2. The display flashes red twice and then the key lock is
activated.
3. If the button is pressed in lock mode, the indicator flashes
red twice to indicate that it is in lock mode.
4. To unlock the function, press the switch for 2 seconds until
the display flashes twice
and the green light shows.
Commissioning
A
Charge the lamp
E
Intelligent control function
Warm white
Key
Locked
Flashes
100%
Maximal
Minimal
10%
Flashes
Red
OFF
1
2
3
HOLD
Degree of brightness
HOLD
1. The Vixen SG-L02 lamp has an intelligent control function
that not only continuously adjusts the brightness between
10% and 100% but also maintains the last used colour
modes (red/white).
2. If the button is pressed continuously during lighting in any
of the modes, Intelligent Control is activated.
3. The brightness level changes from 10% to 100% and back
from 100% to 10% if the button is pressed further.
4. When the illumination is 100% or 10%, the lamp flashes to
indicate that the maximum or minimum illumination level
has been reached.
5. When you release the push button, the brightness of the
lamp remains at the current intensity.
6. The push button must be held for two seconds to save the
last setting of the illumination red or white to start with
this colour at the next switch-on.
Specifications
Light source
4 x LED with natural warm colour
Brightness /
Beam distance
3 ~ 42 lumens (4 x LED with natural
warm colour)
0.28 ~ 7.62 Lumen / ~ 4m (red LED)
Batteries and
accumulators
Lithium-ion polymer battery 600mA
(included in delivery)
Lighting time
LED with natural warm colour:
4~14 hours 100% ~ 10%
Red LED: 6~120 hours hrs (100~10%)
Water resistance
IPX4
Dimensions
41×33×30 mm (width×height×depth)
Weight
29 g
Accessories
Micro USB cable
D
Switching off the headlamp
1. The light goes out if the button is pressed after
more than 2 seconds of illumination in white or
red light mode.
