29
HOW TO USE
Basic operation
Illumination ON and OFF
Focusing on the Polar Alignment Reticle
Adjusting the Brightness
There is a push switch on the top
of the brightness adjustment dial of
the polar alignment scope. Pushing
the switch will illuminate the polar
alignment reticle in red light. The
red light becomes dimmer gradually
after a certain interval of illumination
(about one or two minutes) and
turns off automatically.
You can focus on the polar
alignment reticle by turning the
eyepiece of the polar alignment
scope. While holding the body of
the polar alignment scope on one
hand, turn the eyepiece part with
the other hand.
The brightness of the red light for
the polar alignment reticle can be
varied in 8 steps by turning the
brightness adjustment dial on the
polar alignment scope.
Eyepiece focus ring
Eyepiece focus ring
Push switch
Push switch
Brightness adjustment dial
Brightness adjustment dial
