Take off the two finder
bracket fixing screws on
the telescope.
Attach the bracket on the
finder scope as shown in
the figure, tighten the finder
bracket fixing screws secu
-rely.
Preparation
Attaching the Finder Scope to the Telescope
Preparation /
Attaching the Finder Scope to the T
elescope
Attaching the Finder Scope
(PORTA
II
A70Lf)
Back out the adjustment
screws on the finder brac
-ket to allow passage of
the finder scope. (Make
sure the adjustment screws
do not fall off the bracket.)
Slide the rubber O-ring onto the eyepiece end of the
finder. There are two grooves on the finder tube.
Position the O-ring on the narrow groove at the middle
of the finder tube.
Pull up the fixed stud on
the bracket ring and pull
it so that the finder tube
slides into the bracket ring
from its eyepiece end.
Release the fixed stud at
the position that the wide
groove on the finder tube
is underneath the stud.
Tighten the two adjust-
ment screws so that the
finder scope is aligned
as shown in the figure.
Loosen the finder bracket
lock screw on the tele
-scope.
Attach the finder bracket
as shown in the figure,
tighten the finder bracket
lock screw securely.
Attaching the Finder Scope
(PORTA
II
A80Mf and PORTA
II
R130Sf)
Adjustment Screws
Adjustment Screws
Finder Bracket
Finder Bracket
Groove (narrow side)
O-ring
Finder Scope
Adjustment Screws
Finder Bracket
Lock screw
Finder Bracket
Lock screw
Finder Bracket
Lock screw
Finder Bracket
Lock screw
Finder Bracket
Fixing Screws
Finder Bracket
Fixing Screws
Finder Bracket
Fixing Screws
Finder Bracket
Fixing Screws
Attaching the Finder Scope
(PORTA
II
/ MINI PORTA Telescopes with the XY Red Dot Finder)
Loosen the chrome finder
bracket lock screw on the
telescope.
Attach the bracket on the
dot finder as shown in the
figure, tighten the finder
bracket lock screw securely.
②
Finder Bracket
Lock screw
Finder Bracket
Lock screw
Finder Bracket
Lock screw
Finder Bracket
Lock screw
Dot Finder
Dot Finder
8