63
APPLICATION
Declination body
Declination body
Declination body
Declination body
Declination
Declination
body
body
Declination body cover
Declination body cover
R.A motor module
R.A motor module
4mm
4mm
Allen wrench
Allen wrench
3mm
3mm
Allen wrench
Allen wrench
Electrical contact
Electrical contact
6
Turn the R.A motor module to change the orientation so that the
screw holes (larger holes with no thread) are aligned in tandem. Re-
place the the three socket head cap screws in place and tighten the
screws securely with the 3mm Allen wrench.
7
Attach the declination body onto the polar axis body assembly so that
the electrical contact on the declination body fits the counterpart on
the R.A motor module as shown in the figure.
8
Replace the two socket head cap screws that were removed in step
3 above while holding the declination body. Install the batteries, if
necessary. Tighten the screws with the Allen wrench of 4mm on a side
securely.
9
Replace the declination body cover in place noting the direction of the
hook on the cover.
