VXS7920
INSTALLATION GUIDE
PAGE 3 of 3
OPERATION
To start using the electronic horn set the vehicle's ignition to the ON position.
ON/OFF
: Turning the SWITCH located in the control box to the ON position will turn on the control box and
set it on SLEEP mode.
BLUETOOTH REMOTE CONTROL
PAIRING
: Using the USB cable provided connect the remote to the USB port in the control box. Press the
ON/OFF button located in the remote to turn ON the remote, wait a few seconds and then turn off the remote
and control box. To complete the pairing process turn ON again the control box and the remote.
CHARGING
: Using the USB cable provided connect the Bluetooth microphone to the USB port in the control
box or to the lighter socket. If using the lighter plug connect this one to a 12V outlet in your vehicle.
“RIO”
button in the remote will light up RED.
