Vivreau V3-203, Owner'S Manual

Page: 13 / 28

V3-203 Dispensing System Owner’s Manual
13
Section 4
Pre-Installation Requirements
INSTALLATION
IMPORTANT _________________________
Installation must be performed by properly
trained and qualified persons and comply with
Federal, State and Local Codes for connection
to electrical supplies, water supplies and
pressurized gas systems.
Note: Vivreau cannot be held responsible for
any damage caused by improper installation.
LOCATION
A completed Pre-installation Checklist must
be available prior to installation. The Vivreau
Dispensing System must be installed indoors
where the ambient air temperature will not
exceed 90°F.
The Vivreau V3-203 Dispensing System should not
be exposed to spills, spray, steam or high humidity.
A suitable location should be chosen within 40”
of the electrical and water supply connections.
The Vivreau V3-203 Dispensing System is designed
to be installed in an under-counter cabinet with
adequate ventilation for component cooling.
Cabinet opening required by model:
Model V3-203A: 30” or greater
Model V3-203B: 24” or greater
Do not obstruct air vents.
Install the system on a firm, level floor or base.
35
3 8
"
12
7 8
"
30"
Min. Cabinet Width
Min. Cabinet Width
24"
35
3 8
"
12
7 8
"
V3-203A-1
NEMA 5-15 Double Socket
V3-203B-1
Filter
Stand-Pipe
Terminate 24" above the floor
Main Water Inlet
Terminate 24" above the floor
Chiller
NEMA 5-15 Double Socket
Filter
Stand-Pipe
Terminate 24" above the floor
Main Water Inlet
Terminate 24" above the floor
Chiller
Vivreau V3-203A and V3-203B Under-counter Installation Setup