Vivotek TC5632, User Manual

Page: 25 / 91

- 24 -
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532
Build a security application
The Administrator can use the built-in motion detection to monitor any movement to
perform many useful security applications. To upload the snapshots, users can
choose either email or FTP according to user’s needs. Both e-mail and FTP use the
network settings on the Email and FTP page. Refer to the definition section for detail
configuration.
1.
Click on “ Configuration ” on homepage,
2. Click on “ Motion detection ” at the left column,
3. Check “Enable motion detection”,
4. Click on new to have a new window to monitor video,
5. Type in a name to identify the new window,
6. Use the mouse to click, hold, and drag the window corner to resize or the title bar
to move,
7. Fine-tune using the “Sensitivity” and “Percentage” fields to best suit the camera’s
environment. Higher ”Sensitivity” detects the slighter motion. Higher
“Percentage” discriminates smaller objects,
8. Clicking on “Save” enables the activity display. Green means the motion in the
window is under the watermark set by Administrator and red means it is over the
watermark,
9. Click on “ Application ” at the left column,
10.Check the weekdays as you need and give the time interval to monitor the motion
detection every day,
11.Select the Trigger on Motion detection.
12.Set the
delay before detecting next motion to avoid continuous false alarms
following the original event,
13.Set the number of pre-event and post-event images to be uploaded,
14.Check the window name set in step 5,
15.Check the way to upload snapshot,