Vivotek TB5328 SERIES User Manual Download Page 314

Page: 314 / 317

VIVOTEK

314 - User's Manual

Technical Specifications

Model

TB5328-F3/TB5328-EF3

TB5328-T/TB5328-ET

System Information

CPU

Multimedia SoC (System-on-Chip)

Flash

1Gb

RAM

4Gb

Camera Features

Image Sensor

1/3.2" Progressive CMOS

Maximum Resolution

2560x1920 (5MP)

Lens Type

Vari-focal, Remote Focus (IB8382-T/-ET),

Fixed-focal (IB8382-F3/-EF3)

Focal Length

TB5328-F3/TB5328-EF3: f = 3.6 mm

TB5328-T/TB5328-ET: f = 3 ~ 9 mm

Aperture

TB5328-F3/TB5328-EF3: F2.1

TB5328-T/TB5328-ET: F1.2 ~ F2.3

Auto-iris

P-iris (TB5328-T/TB5328-ET)

Field of View

TB5328-F3/TB5328-EF3:

92° (Horizontal)

76° (Vertical)

105° (Diagonal)

TB5328-T/TB5328-ET:

35° ~ 78° (Horizontal)

27° ~ 54° (Vertical)

44° ~ 100° (Diagonal)

Shutter Time

1/5 sec. to 1/32,000 sec.

WDR Technology

WDR Enhanced

Day/Night

Removable IR-cut filter for day & night function

Minimum Illumination

TB5328-F3/TB5328-EF3:

0.089 Lux @ F2.1 (Color)

0.001 Lux @ F2.1 (B/W)

TB5328-T/TB5328-ET:

0.04 Lux @ F1.2 (Color)

0.001 Lux @ F1.2 (B/W)

Pan/tilt/zoom Functionalities

ePTZ:

48x digital zoom (4x on IE plug-in, 12x built in)

IR Illuminators

Built-in IR illuminators, effective up to 30 meters

with Smart IR

IR LED*8

On-board Storage

SD/SDHC/SDXC card slot

Video

Compression

H.264 & MJPEG

Maximum Frame Rate

H.264:

15 fps @ 2560x1920

15 fps @ 2408x1536

30 fps @ 1920x1080

MJPEG:

15 fps @ 2560x1920

15 fps @ 2408x1536

30 fps @ 1920x1080

Maximum Streams

4 simultaneous streams

S/N Ratio

Above 65 dB

Dynamic Range

70 dB

Video Streaming

Adjustable resolution, quality and bitrate

Image Settings

Adjustable image size, quality and bit rate, time stamp,

text overlay, flip & mirror, configurable brightness,

contrast, saturation, sharpness, white balance, exposure

control, gain, backlight compensation, privacy masks,

scheduled profile settings, Seamless recording, Smart

Stream, 3D Noise Reduction, Video Rotation, Defog

Audio

Audio Capability

Audio input/output (full duplex)

Compression

G.711, G.726

Interface

External microphone input

Audio output

Network

Users

Live viewing for up to 10 clients

Protocols

IPv4, IPv6, TCP/IP, HTTP, HTTPS, UPnP, RTSP/RTP/RTCP,

IGMP, SMTP, FTP, DHCP, NTP, DNS, DDNS, PPPoE, CoS,

QoS, SNMP, 802.1X, UDP, ICMP, ARP, SSL, TLS

Interface

10Base-T/100 BaseTX Ethernet (RJ-45)

*It is highly recommended to use standard Cat. 5e & Cat.

6 cables which are compliant with the 3P/ETL standard.

ONVIF

Supported, specification available at www.onvif.org

Intelligent Video

Video Motion Detection

Five-window video motion detection

Technical Specifications

Compatible Accessories

VCA*

Line crossing detection, field detection, loitering

detection

Alarm and Event

Alarm Triggers

Video motion detection, manual trigger, digital input,

periodical trigger, system boot, recording notification,

camera tampering detection, audio detection

Alarm Events

Event notification using digital output, HTTP, SMTP, FTP

and NAS server, SD Card

File upload via HTTP, SMTP, FTP, NAS server and SD card

General

Smart Focus System

TB5328-T/TB5328-ET: Remote Focus

Connectors

RJ-45 cable connector for Network/PoE connection

Audio input

Audio output

DC 12V power input

Digital input*1

Digital output*1

LED Indicator

System power and status indicator

Power Input

DC 12V

IEEE 802.3at PoE

Power Consumption

TB5328-F3:

Max. 7.5 W (DC12V)

Max. 9 W (PoE)

TB5328-T:

Max. 8 W (DC12V)

Max. 9.5 W (PoE)

TB5328-EF3/IB8382-ET:

Max. 21 W (DC12V)

Max. 25 W (PoE)

Dimensions

Ø 88 x 293 mm

Weight

Net: 1264 g

Casing

Weather-proof IP66-rated housing, IK10 (Camera body)

Safety Certifications

TB5328-F3/-EF3:

CE, LVD, FCC ClassB, VCCI, C-Tick

TB5328-T/-ET:

CE, LVD, FCC ClassA, VCCI, C-Tick, UL

Operating Temperature

TB5328-T/-F3:

Starting Temperature: -10°C ~ 50°C (14°F~ 122°F)

Working Temperature: -20°C ~ 50°C (-4°F~ 122°F)

TB5328-ET/-EF3:

Starting Temperature: -40°C ~ 50°C (-40°F ~ 122°F)

Working Temperature: -50°C ~ 50°C (-58°F ~ 122°F)

Warranty

TB5328-F3/-EF3: 24 months

TB5328-T/-ET: 36 months

System Requirements

Operating System

Microsoft Windows 7/8/Vista/XP/2000

Web Browser

Mozilla Firefox 7~10 (Streaming only)

Internet Explorer 7/8/9/10/11

Other Players

VLC: 1.1.11 or above

Quicktime: 7 or above

Included Accessories

User's manual, quick installation guide, Installation

Wizard 2, ST7501 32-channel recording software

Others

Quick installation guide, warranty card, sun shield, wall

mount bracket, waterproof RJ45 Ethernet enclosure,

alignment sticker / desiccant bag, waterproof connector,

screw

Dimensions

80 mm

293 mm

Mounting Kits

AM-311

Pole Mount Adaptor

AM-411

Corner Mount Adaptor

AM-714

Junction Box

6F, No.192, Lien-Cheng Rd., Chung-Ho,

New Taipei City, 235, Taiwan, R.O.C.

T: +886-2-82455282 F: +886-2-82455532

E: [email protected]

VIVOTEK INC.

2050 Ringwood Avenue,

San Jose, CA 95131

T: 408-773-8686 F: 408-773-8298

E: [email protected]

VIVOTEK USA

Ver. 5

Randstad 22-133, 1316BW Almere,

The Netherlands

T: +31(0)36-5298-434

E: [email protected]

VIVOTEK Europe

602, Best sky Tower, Plot No. F-5,

Netaji Subhash Place, Pitam Pura, Delhi-110 034

T: +91-11-45137465

E: [email protected]

VIVOTEK India

* Available per project request

Summary of Contents for TB5328 SERIES






























































































































































































































































































































Search results

Summary of Contents for TB5328 SERIES

Reviews:

Related manuals for TB5328 SERIES

Brands by name

Popular brands

Vivotek TB5328 SERIES, User Manual

Search results

Summary of Contents for TB5328 SERIES

Reviews:

Related manuals for TB5328 SERIES

Brands by name

Popular brands