Vivotek SUPREME IP9172-LPC User Manual Download

Page: 32 / 362

VIVOTEK

32 - User's Manual

MP4 Saving Options

Users can record live video as they are watching it by clicking

Start MP4 Recording on the main

page. Here, you can specify the storage destination and file name.

Folder: Specify a storage destination on your PC for the recorded video files. The location can be

changed.

File name prefix: Enter the text that will be appended to the front of the video file name. A specified folder

will be automatically created on your local hard disk.

Add date and time suffix to the file name

: Select this option to append the date and time to the end of the

file name.

Local Streaming Buffer Time

Due to the unsteady bandwidth flow, the live streaming may lag and not be very smoothly. If you enable

this option, the live streaming will be stored temporarily on your PC’s cache memory for a few seconds

before being played on the live viewing window. This will help you see the streaming more smoothly. If

you enter 3,000 Millisecond, the streaming will delay for 3 seconds.

CLIP_

20180321-180853

Date and time sufﬁx

The format is: YYYYMMDD_HHMMSS

File name preﬁx

Two way audio

Half duplex: Audio is transmitted from one direction at a time, e.g., from a PC holding a web console with

the camera.

Full duplex: Audio is transmitted in both directions simultaneously.

Summary of Contents for SUPREME IP9172-LPC











































































































































































































































































































































































Search results

Summary of Contents for SUPREME IP9172-LPC

Reviews:

Related manuals for SUPREME IP9172-LPC

Brands by name

Popular brands

Vivotek SUPREME IP9172-LPC, User Manual

Search results

Summary of Contents for SUPREME IP9172-LPC

Reviews:

Related manuals for SUPREME IP9172-LPC

Brands by name

Popular brands