manualshive.com logo in svg

Vivotek SD9161-H, User Manual

Share
Download
Vivotek SD9161-H User Manual Download Page 19

 

 

VIVOTEK

 

User's Manual - 19  

Wall Mount - Mount Option B

B-1. The AM-21C wall mount bracket is separately purchased. Install the included bracket to the 

AM-21C using the included screws. Note the alignment mark should be pointing outwards. 

Ø 9.5mm or 3/8”

B-2. Drill 4 pilot holes (9.5mm in diameter and 4cm deep) into the wall, and then hammer in the 

threaded anchors. Note that you should hammer the anchors with hex nuts on them so that 

the threaded poles will not be deformed! If preferred, drill another hole for routing cables. 

Default 

Front

AM-21C

Summary of Contents for SD9161-H























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands