Vivotek SC8131, User Manual

Page: 76 / 290

VIVOTEK
76 - User's Manual
In
Out 1
2
3
4
4
1
Flow path is another detection rule type. When passengers pass along the flow path, the
camera will record the event and immediately update the counting report on the Liveview
page.
To configure a flow path,
1 Click, hold down, and drag to change the arc angle.
2 Click, hold down, and drag to change the length.
3
Click, hold down, and drag to change the flow path direction. You can turn the
direction 360 º around.
4 Click, hold down, and drag to change width.
The Shift key can also be used with configuration. Click and drag on any part of the
flow path scheme to move it across the screen.
The max. and min. counting heights are also supported with the flow path. Click to select
the Enable height filter checkbox. For each analytics rule, you can manually enter a set of
maximum and minimum height numbers.
The counting report displays at the live view page. The counting results display instantly
and the results are accumulated on the browser console.
If necessary, use the Reset report button to reset the count numbers.
3-3-2. Analytics Rules - How to Draw a Flowpath