Vivotek SC8131 User Manual Download Page 133

Page: 133 / 290

VIVOTEK

User's Manual - 133

MP4 Saving Options

Users can record live video as they are watching it by clicking

Start MP4 Recording on the

main page. Here, you can specify the storage destination and file name.

Folder

: Specify a storage destination for the recorded video files. The location can be changed.

File name prefix: Enter the text that will be appended to the front of the video file name. A specified

folder will be automatically created on your local hard disk.

Add date and time suffix to the file name

: Select this option to append the date and time to the end

of the file name.

Local Streaming Buffer Time

Due to the possiblity of encountering unsteady bandwidth flow, the live streaming may lag and not

be very smoothly. If you enable this option, the live streaming will be stored on console PC’s cache

memory for a configurable period of time before being played on the live view window. This helps

you see the streaming more smoothly. If you enter 3000 Millisecond, the streaming will delay for 3

seconds.

CLIP_

20110628-180853

Date and time sufﬁx

The format is: YYYYMMDD_HHMMSS

File name preﬁx

Summary of Contents for SC8131



































































































































































































































































































Search results

Summary of Contents for SC8131

Reviews:

Related manuals for SC8131

Brands by name

Popular brands

Vivotek SC8131, User Manual

Search results

Summary of Contents for SC8131

Reviews:

Related manuals for SC8131

Brands by name

Popular brands