VIVOTEK - Built with Reliability
82 - User's Manual
3-5-9. Settings - Alarm - Alarm
The events reported from individual cameras' digital inputs, digital outputs, and motion detection
can be accommodated in the NVR system's alarm settings. These events will then be reported
or trigger corresponding actions as follows:
1. Reporting events via Email or system buzzer.
2. Triggering video snapshot and text message by the occurrences of events to an FTP site.
3. Triggering the camera(s) for its lens to move to a preset position.
4. Triggering the cameras' digital output.
5. Triggering an event push to VIVOCloud.
You can create up to 10 instances of alarm.
Hardware connections to DIs or DOs, e.g., window sensors, should be made separately. The
motion detection configuration can be made in the Camera configuration window.
Below is a glimpse of alarm sources and alarm actions:
Sources
Actions
Camera/ system DI
►
Video recording
►video footage
Camera/ system DO
►snapshots
Motion detection
Buzzer
Disk full
FTP
►snapshots
Camera preset points
►Pan-Tilt-Zoom
Disk failure
PIR
Camera DO
Tampering
Camera disconnected
Event push to VIVOCloud
Fan error
* Camera DI/DO, motion detection, and tampering are not
supported for ONVIF cameras.
When an alarm is triggered, a message prompt
will appear on the Liveview or any configuration
window.
