Vivotek ND8321 User Manual Download Page 121

Page: 121 / 184

VIVOTEK - Built with Reliability

User's Manual - 121

Restore

- If you have a previously-saved profile, you can restore your previous configuration.

Click the Restore button.

A file location window will prompt. Locate the backup file, and click Open. The Restore

process will take several minutes to complete, and system operation will be interrupted during

the process.

Restore Default

- There are two kinds of defaults for the NVR systems: System defaults and

factory defaults.

The

system defaults

can be restored using the resetbutton on the system panel (press for 5

seconds) . This applies when users forget about its IP address or login password, while most

other operation details will remain unchanged.

The

factory defaults

(operated on this window) restores to its primitive state before shipping,

and hence users' configurations (such as host name, IP address, and layout settings) will be

erased.

Click Restore to restore your system defaults. A warning message will appear. Click OK to

proceed. The Restore process will take several minutes to complete, and system operation

will be interrupted during the process.

A successful operation will produce the following message.

Summary of Contents for ND8321

























































































































































































Search results

Summary of Contents for ND8321

Reviews:

Vivotek ND8321, User Manual, Page: 121 / 184

Search results

Summary of Contents for ND8321

Reviews: