VIVOTEK
User's Manual - 269
© 2019 VIVOTEK INC. All Right Reserved
137
PARAMETER
VALUE
SECURITY
(get/set)
DESCRIPTION
focusmode
auto,onetimeauto,sp
otlight,manual
<product
dependent>
0/7
Focus mode selection:
"auto"
: Camera will automatically
adjust the focus position full time to
adapt a clear picture.
"onetimeauto"
: Camera will
automatically adjust the focus position
one time, which follows any PTZ
control.
"spotlight"
: Camera will automatically
adjust the focus position full time, and
to consider a spotlight avoidance
situation.
"manual"
: Turn off the automatically
focus function. For user to control the
focus position manually as their
purpose.
* Only available when
"capability_camctrl_c<0~(n-1)_zoommo
dule" is 1.
* We support this parameter when the
version number (httpversion) is equal or
greater than 0304a.
Group:
capability_ptz_c<0~(n-1)>
n denotes the value of "capability_nvideoin"
(capability_ptzenabled > 0 and capability_camctrl_c<0~(n-1)>_zoommodule !=0)
* We support this group when the version number (httpversion) is equal or greater than 0303b.
PARAMETER
VALUE
SECURITY
(get/set)
DESCRIPTION
panspeedlv
0, <positive integer> 0/7
The maximum speed level of pan
motion.
*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildin
pt" is "1"
© 2019 VIVOTEK INC. All Right Reserved
138
PARAMETER
VALUE
SECURITY
(get/set)
DESCRIPTION
minpan
0, <positive integer> 0/7
The lower limit for pan position.
*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildin
pt" is "1"
maxpan
0, <positive integer> 0/7
The upper limit for pan position.
*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildin
pt" is "1"
minpanangle
<integer>
0/7
The lower limit for pan angle.
*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildin
pt" is "1"
maxpanangle
<integer>
0/7
The upper limit for pan angle.
*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildin
pt" is "1"
tiltspeedlv
0, <positive integer> 0/7
The maximum speed level of tilt
motion.
*Only available when bit1 of
"capability_camctrl_c<0~(n-1)>_buildin
pt" is "1"
mintilt
0, <positive integer> 0/7
The lower limit for tilt position.
*Only available when bit1 of
"capability_camctrl_c<0~(n-1)>_buildin
pt" is "1"
maxtilt
0, <positive integer> 0/7
The upper limit for tilt position.
*Only available when bit1 of
"capability_camctrl_c<0~(n-1)>_buildin
pt" is "1"
mintiltangle
<integer>
0/7
The lower limit for tilt angle.
*Only available when bit1 of
"capability_camctrl_c<0~(n-1)>_buildin
pt" is "1"
