Vivotek MD7530 Quick Installation Manual Download Page 9 | Manualshive

Page: 9 / 12

Vivotek MD7530 Quick Installation Manual Download Page 9

EN - 8

Network Camera

Model No: MD7530

Made in Taiwan

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Pat. 6,930,709

RoHS

V I

MAC:0002D107258A

1. Install “Installation Wizard 2” from the Software Utility directory on the software CD.
2. The program will conduct an analysis of your network environment. After your network is ana-

lyzed, please click on the “Next” button to continue the program.

3. The program will search for VIVOTEK Video Receivers, Video Servers, and Network Cameras

on the same LAN.

4. After searching, the main installer window will pop up. Click on the MAC that matches the one

labeled on the bottom of your device to connect to the Network Camera via Internet Explorer.

0002D107258A

00-02-D1-07-25-8A 192.168.5.151 MD7530

Installation

Wizard 2

Assigning an IP Address

5

«
...
7
8
9
10
11
...
»

Summary of Contents for MD7530













Reviews:

No comments