VIVOTEK
User's Manual - 177
© 2019 VIVOTEK INC. All Right Reserved
37
7.2.1 Status per Channel
Group:
status_c<0~(n-1)>
for n channel products
n denotes the value of "capability_nvideoin"
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
signal_detect
<boolean>
1/7
Indicates whether the video source is
connected or not.
* Only available when
capability_videoin_type is 0 or 1.
signal_type
ntsc,pal
1/7
The actual modulation type.
* Only available when
capability_videoin_type is 0 or 1.
7.3Digital Input Behavior Define
Group:
di_i<0~(n-1)>
for n is the value of "capability_ndi"
(capability_capability_ndi > 0)
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
normalstate
high,
low
1/1
Indicates open circuit or closed circuit
(inactive status)
7.4Digital Output Behavior Define
Group:
do_i<0~(n-1)>
for n is the value of "capability_ndo"
(capability_ndo > 0)
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
normalstate
open,
grounded
1/1
Indicate open circuit or closed circuit
(inactive status)
7.5Security
1. Group:
security
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
privilege_do
view, operator,
admin
1/6
Indicate which privileges and above
can control digital output
(capability_ndo > 0)
© 2019 VIVOTEK INC. All Right Reserved
38
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
privilege_camctrl
view, operator,
admin
1/6
Indicate which privileges and above
can control PTZ
(capability_ptzenabled > 0 or
capability_eptz > 0)
user_i0_name
string[64]
6/7
User name of root
user_i<1~20>_name
string[64]
6/7
User name
user_i0_pass
password[64]
7/6
Root password
user_i<1~20>_pass
password[64]
7/6
User password
user_i0_privilege
view,
operator,
admin
6/7
Root privilege
user_i<1~20>_ privilege
view,
operator,
admin
6/6
User privilege
7.6Network
Group:
network
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
preprocess
<positive integer>
6/6
An 32-bit integer, each bit can be set
separately as follows:
Bit 0 => HTTP service;
Bit 1=> HTTPS service;
Bit 2=> FTP service;
Bit 3 => Two way audio and RTSP
Streaming service;
To stop service before changing its port
settings. It’s
recommended
to set this
parameter when change a service port
to the port occupied by another service
currently. Otherwise, the service may
fail.
Stopped service will auto-start after
changing port settings.
Summary of Contents for MA9322-EHTV
Page 93: ...VIVOTEK User s Manual 93 ...
