VIVOTEK - A Leading Provider of Multimedia Communication Solutions
- User's Manual
To set a preset position, follow the steps below�
1
:
Adjust the Network Camera to a desired position using the buttons on the right side of the
window�
2
:
In the Preset position name text box, enter a descriptive name for the preset position� The
preset position name allows up to forty characters�
3
:
Click Add to take effect� The preset position name will appear in the Preset Positions drop-
down list� To remove a preset position from the list, select a preset position name from the
Preset Positions drop-down list and then click Delete�
Custom Command
Click Custom Command to open the Custom Command page� In this page, you can set addition
command buttons for controlling the PTZ scanner� A total of five command buttons can be
configured�
To add a new control button, follow the steps below�
1
:
In the Button name text box, enter the descriptive name for the control button�
2
:
Refer to the PTZ scanner and enter the command�
3
:
Click Save to take effect and click Close to quit this page�
4
:
The new custom command button will be displayed in the main page�
