4
Installation
V
Installation Suggestions
IV
If you plan to install this camera enclosure into a tropical, sea coastal, or an environment
where salt water or corrosive industrial waste water/moist are present, please seal each
stainless steel screws and fittings with a silicon grease compounds. This will help prevent
electrolysis to occur and extend the life span of the camera and housing.
IMPORTANT:
1. Disconnect devices: A readily accessible disconnect device in the building installation wiring
should be incorporated.
2. Electrical Connection: Only a qualified electrician is allowed to make electrical connections.
1.
Loosen the socket screws using the included L-type hex key wrench, and open the
cover.
2.
Secure the IR light units to the included iron brackets using a crescent wrench and a
socket wrench.
