manualshive.com logo in svg

Vivotek IP816A-HP, User Manual

The Vivotek IP816A-HP is a cutting-edge surveillance camera that guarantees high-performance and exceptional image quality. To ensure a seamless user experience, a comprehensive User Manual is available for download, free of charge, from our website. This manual provides detailed instructions and valuable insights for maximizing the camera's capabilities.

Share
Download
background image

 

 

VIVOTEK

 

56 - User's Manual

■ 

WDR Pro:

 

  This refers to the Wide Dynamic Range function that enables the camera to capture details in 

a high contrast environment. Use the checkbox to enable the function, and use the slide bar 

to select the strength of the WDR Pro functionality, depending on the lighting condition at the 

installation site. You can select a higher effect when the contrast is high (between the shaded 

area and the light behind the objects).    

Please follow the steps below to configure a profile:

1. Check 

Enable this profile

.

2. Select the applied mode: Day mode, Night mode, 

or Schedule mode. Please manually enter a range 

of time if you choose Schedule mode.

3. Configure Exposure control settings in the folowing 

columns. Please refer to previous dicussions for 

detailed information.

4. Click 

Save

 to enable the setting and click 

Close

 to 

exit the page.

You can click 

Restore

 to recall the original settings without incorporating the changes. When 

completed with the settings on this page, click 

Save

 to enable the settings.

If you want to configure another sensor setting for day/night/schedule mode, please click 

Profile

 to 

open  the Profile of exposure settings page as shown below.

Activated period

: Select the mode this profile to apply to: Day mode, Night mode, or Schedule 

mode. Please manually enter a range of time if you choose Schedule mode. Then check 

Save

 to for 

the configuration take effect.  

Summary of Contents for IP816A-HP











































































































































































































































Reviews:

No comments

Related manuals for IP816A-HP

GE G Owner'S Manual preview
G
Brand: GE Pages: 115
I-G3N Z Series Reference Manual preview
Z Series
Brand: I-G3N Pages: 28
Panasonic WV-SW155 Installation Manual preview
WV-SW155
Brand: Panasonic Pages: 44
Panasonic WV-SFV781L Quick Start Manual preview
WV-SFV781L
Brand: Panasonic Pages: 2
Panasonic WV-SFV781L Important Information Manual preview
WV-SFV781L
Brand: Panasonic Pages: 32
Panasonic HomeHawk KX-HNC800 Quick Setup Manual preview
HomeHawk KX-HNC800
Brand: Panasonic Pages: 2
Panasonic HM-TA2 Operating Instructions Manual preview
HM-TA2
Brand: Panasonic Pages: 100
Panasonic BL-C10A - Network Camera - Pan Getting Started preview
BL-C10A - Network Camera - Pan
Brand: Panasonic Pages: 4
Panasonic BL-C30A - Wireless 802.11 b/g Network Camera Installation And Troubleshooting Instructions preview
BL-C30A - Wireless 802.11 b/g Network Camera
Brand: Panasonic Pages: 12
Panasonic BL-C230 Series Setup Manual preview
BL-C230 Series
Brand: Panasonic Pages: 2
Panasonic BL-C140 Important Information preview
BL-C140
Brand: Panasonic Pages: 2
Panasonic BL-C10 Installation & Troubleshooting Manual preview
BL-C10
Brand: Panasonic Pages: 32
Panasonic BL-C10 Getting Started preview
BL-C10
Brand: Panasonic Pages: 4
Panasonic BL-C1 Getting Started preview
BL-C1
Brand: Panasonic Pages: 4
Panasonic BL-C1 Troubleshooting Manual preview
BL-C1
Brand: Panasonic Pages: 16
Panasonic BB-HCM381 Operating Instructions preview
BB-HCM381
Brand: Panasonic Pages: 2
Panasonic BB-HCM311 Installation preview
BB-HCM311
Brand: Panasonic Pages: 2
Panasonic BB-HCM311 Troubleshooting Manual preview
BB-HCM311
Brand: Panasonic Pages: 24

Brands by name

Popular brands

Load more brands