VIVOTEK
User's Manual - 119
A green bar indicates that even though motions have been detected, the event has not been triggered
because the image variations still fall under the preset threshold.
If you want to configure other motion detection settings for day/night/schedule mode (e.g., for a different
lighting condition), please click
Profile
to open the Motion Detection Profile Settings page as shown
below. Another three motion detection windows can be configured on this page.
Please follow the steps beolw to set up a profile:
1. Create a new motion detection window.
2. Check
Enable this profile
.
3. Select the applicable mode: Day mode, Night mode, or Schedule mode. Please manually enter a time
range if you choose Schedule mode.
4. Click
Save
to enable the settings and click
Close
to exit the page.
This motion detection window will also be displayed on the Event Settings page. You can go to
Event
> Event settings > Trigger
to select it as a trigger source. Please refer to page 128 for detailed
information.
Percentage = 30%
Video(TCP-AV)
2010/12/10 17:08:56
2014/07/20
