Vivotek IB8338-H User Manual Download

Page: 13 / 231

VIVOTEK

User's Manual - 13

Hardware Reset

The reset button is used to reset the system or restore the factory default settings. Sometimes

resetting the system can return the camera to normal operation. If the system problems remain

after reset, restore the factory settings and install again.

Reset

: Press the recessed reset button. Wait for the Network Camera to reboot.

Restore

: Press and hold the reset button until the status LED rapidly blinks. Note that all settings

will be restored to factory default. Upon successful restore, the status LED will blink green and

red during normal operation.

SD/SDHC/SDXC Card Capacity

This network camera is compliant with

SD/SDHC 16GB / 8GB / 32GB / 64GB

and other

preceding standard SD cards.

Reset Button

Summary of Contents for IB8338-H








































































































































































































































Search results

Summary of Contents for IB8338-H

Reviews:

Related manuals for IB8338-H

Brands by name

Popular brands

Vivotek IB8338-H, User Manual

Search results

Summary of Contents for IB8338-H

Reviews:

Related manuals for IB8338-H

Brands by name

Popular brands