Vivotek FD9187 Series, User Manual

Page: 346 / 386

VIVOTEK
346 - User's Manual
8.10 ePTZ Preset Locations (capability.eptz > 0 and
capability_fisheye = 0)
Note: This request requires Operator privileges.
Method: GET/POST
Syntax:
http://< servername >/cgi-bin/operator/ePreset.cgi?channel=<value>&stream=<value>
[&addpos=<value>][&delpos=<value>][&return= <return page> ]
PARAMETER VALUE DESCRIPTION
channel <0~(n-1)> Channel of the video source.
stream <0~(m-1)> Stream.
addpos <Text string less than
40 characters> Add one preset location to the preset list.
delpos <Text string less than
40 characters> Delete preset location from the preset list.
return <return page> Redirect to the page <return page> after the parameter is assigned.
The <return page> should be the relative path according to the root of
camera. If you omit this parameter, it will redirect to an empty page.
* If the <return page> is invalid path, it will ignore this parameter.
8.11 IP Filtering for ONVIF
Syntax:<product dependent>
http://< servername >/cgi-bin/admin/ipfilter.cgi?type[=<value>]
http://< servername >/cgi-bin/admin/ipfilter.cgi?method=add<v4/v6>&ip= <ipaddress> [&index=<value>][&ret
urn=< return page >]
http://< servername >/cgi-bin/admin/ipfilter.cgi?method=del<v4/v6>&index=<value>[&return=< return page >]
PARAMETER VALUE DESCRIPTION
type NULL Get IP filter type
allow, deny Set IP filter type
method addv4 Add IPv4 address into access list.
addv6 Add IPv6 address into access list.
delv4 Delete IPv4 address from access list.