VIVOTEK
56 - User's Manual
Please follow the steps below to setup a profile:
1. Check
Enable this profile
.
2. Select the applied mode: Day mode, Night mode, or Schedule mode. Please manually enter a
range of time if you choose the Schedule mode.
3. Configure Exposure control settings in the folowing columns. Please refer to previous dicussions
for detailed information.
4. Click
Save
to enable the setting and click
Close
to exit the page.
You can click
Restore
to recall the original settings without incorporating the changes. When
completed with the settings on this page, click
Save
to enable the settings.
If you want to configure another sensor setting for day/night/schedule mode, please click
Profile
to
open the Profile of exposure settings page as shown below.
Activated period
: Select the mode this profile to apply to the Schedule mode. Please manually enter
a range of time if you choose Schedule mode. Then check
Save
to take effect.
■ Maximum Exposure Time: The configurable max. exposure time is tunable according to lighting
conditions with values ranging from 1/8000 to 1/5 of a second.
■ Maximum Gain Control: Tune the slider bar to set the Gain Control to the best image quality.
Higher gain control value will generate a certain amount of noises.
